HCPL-7860K Electronic IC Chips Optically Isolated Sigma-Delta Modulator

Agilent HCPL-7860/HCPL-786J

Optically Isolated Sigma-Delta (Σ−∆) Modulator

Description

The HCPL-7860/HCPL-786J Optically Isolated Modulator and HCPL-0872 Digital Interface IC or digital filter together form an isolated programmable two-chip analog-to-digital converter. The isolated modulator allows direct measurement of motor phase currents in power inverters.

In operation, the HCPL-7860/ HCPL-786J Isolated Modulator (optocoupler with 3750 VRMS dielectric withstand voltage rating) converts a lowbandwidth analog input into a high-speed one-bit data stream by means of a Sigma-Delta (Σ− ∆) over-sampling modulator. This modulation provides for high noise margins and excellent immunity against isolation-mode transients. The modulator data and on-chip sampling clock are encoded and transmitted across the isolation boundary where they are recovered and decoded into separate high-speed clock and data channels.

Features

• 12-bit Linearity

• 200 ns Conversion Time (PreTrigger Mode 2 with HCPL-0872)

• 12-bit Effective Resolution with 5 µs Signal Delay (14-bit with 102 µs) (with HCPL-0872)

• Fast 3 µs Over-Range Detection (with HCPL-0872)

• ± 200 mV Input Range with Single 5 V Supply

• 1% Internal Reference Voltage Matching

• Offset Calibration (with HCPL- 0872)

• -40°C to +85°C Operating Temperature Range

• 15 kV/µs Isolation Transient Immunity

• Safety Approval: UL 1577, CSA and IEC/EN/DIN EN 60747-5-2

Applications

• Motor Phase and Rail Current Sensing

• Data Acquisition Systems

• Industrial Process Control

• Inverter Current Sensing

• General Purpose Current Sensing and Monitoring

Absolute Maximum Ratings

Notes:

1. If V_IN- (pin 3) is brought above V_DD1 - 2 V with respect to GND1 an internal opticalcoupling test mode may be activated. This test mode is not intended for customer use.

2. Agilent recommends the use of nonchlorinated solder fluxes.

Stock Offer (Hot Sell)